Silt Bags 1m Pack 200 are an excellent drain protection barrier and water flow control product. Made from re-inforced mesh fabric, and fitted with lifting handles these Silt Bags are cost effective and easy to use. Simply fill with sand or gravel and deploy. Contains lifting handles for easy handling.
Silt Bags measure 290mm wide and 1m in length. Sold in pack of 200 Silt Bags.
Other sedimental control products include: Silt Socks, Silt Fence.
A Silt Fence acts to prevent contamination of exposed soils and construction site borders. It features high tensile strength to allow water damming to the full height of the silt fence, trapping sediment but filter through water transmission. Made from heavy duty polypropylene tape yarns, it is built tough in order to retain its structural integrity until typical construction stresses.
The permeable barrier also helps to reduce water turbidity. Ideal for use in all construction sites to control run-off and lower the risk of pollution and erosion to neighbouring areas. To deploy, simply use wooden stakes to fix into place.
Other sedimental control products include: Silt Socks
Drainage systems whether in residential or commercial areas sooner or later will always end up clogged, broken and/or slow in draining. This is because no matter how careful we are in draining our household and industrial washing, small amounts of residue such as hair, oil or even worse — hazardous chemicals will still make its way to your pipes — the culprit? The holes you see in your drains.
While these holes fulfil the very role of a drain and allow water to pass through, because of its width, hazardous spills and chemicals are able to pass through as well, creating problems for you in the future.
This is why it has now become a common norm for specialty products to be sold made specifically to filter out the liquids we drain, preventing any hazardous chemicals. However, no one could have guessed that one of the best filters is makeshift one — grippy land socks!
Chemical Land Socks 1.5m play an important role in spill containment. Before any clean up measures can commence: a spill must first be contained. Land Socks are used to surround the perimetre of a spill, or to block and protect a near by drain. Ecospill Chemical Land Socks 3m Length are thick and super absorbent. Land Socks can also be called containment socks, or containment booms.
The first step in cleaning up a chemical or dangerous goods spill is to stop the source of the spill (literally pick up the object that is spilling), and the next step is to contain it. In other words, stop the spill spreading. The most effective way to contain a chemical spill is to deploy Land Socks around the perimeter of the spill. Place either the 1.5m or the 3m Land Sock around the edge of the spilled liquid. Use multiple land socks if needed, overlapping them by approximately 30cm on each end, until the spill is completely surrounded. This will ensure that the edge of the spill is absorbed into the land sock and as long as the source of the spill has been stopped, no further liquid will breach the land sock perimeter. Now you can switch to clean up measures.
Any liquid spilled will continue to flow in the direction of gravity. Good site construction means that industrial sites are designed in order to flow all excess water towards stormwater drains, to prevent flooding. This is fantastic when you have a rain event, but it also means that any spilled liquids are also going to flow in the direction of stormwater drains. If you have a chemical spill in the vincinity of a stormwater drain it is vital to deploy a land sock in front of the stormwater drain. The easiest way to do this is to lay a Chemical Land Sock 1.5m or a 3m in front of the stormwater drain if it’s a kerb and channel style, or surrounding it in order to block any flowing liquids from entering it.
Important – In the event of a major spill incident it might also be advisable to consider using a drain seal as well as Land Socks for further drain protection. The drain seal literally seals off an open drain entrance completely, providing a tacky seal so that no liquids can enter the drain. Click for more information on Drain Seals.
Chemical or Hazchem Land Socks play an important role in spill containment. Before any clean up measures can commence: a spill must first be contained. Land Socks are used to surround the perimetre of a spill, or to block and protect a near by drain. Ecospill Chemical Land Socks 3m Length are thick and super absorbent. Land Socks can also be called containment socks, or containment booms.
The first step in cleaning up a chemical or dangerous goods spill is to stop the source of the spill (literally pick up the object that is spilling), and the next step is to contain it. In other words, stop the spill spreading. The most effective way to contain a chemical spill is to deploy Land Socks around the perimeter of the spill. Place either the 1.5m or the 3m Land Sock around the edge of the spilled liquid. Use multiple land socks if needed, overlapping them by approximately 30cm on each end, until the spill is completely surrounded. This will ensure that the edge of the spill is absorbed into the land sock and as long as the source of the spill has been stopped, no further liquid will breach the land sock perimeter. Now you can switch to clean up measures.
Any liquid spilled will continue to flow in the direction of gravity. Good site construction means that industrial sites are designed in order to flow all excess water towards stormwater drains, to prevent flooding. This is fantastic when you have a rain event, but it also means that any spilled liquids are also going to flow in the direction of stormwater drains. If you have a chemical spill in the vincinity of a stormwater drain it is vital to deploy a land sock in front of the stormwater drain. The easiest way to do this is to lay a Chemical Land Sock 3m or a 1.5m in front of the stormwater drain if it’s a kerb and channel style, or surrounding it in order to block any flowing liquids from entering it.
Important – In the event of a major spill incident it might also be advisable to consider using a drain seal as well as Land Socks for further drain protection. The drain seal literally seals off an open drain entrance completely, providing a tacky seal so that no liquids can enter the drain. Click for more information on Drain Seals.
Land Socks play an important role in spill containment. Before any clean up measures can commence: a spill must first be contained. Land Socks are used to surround the perimetre of a spill, or to block and protect a near by drain. Ecospill Fuel and Oil Land Socks 3m Length are thick and super absorbent.
The first step in cleaning up a fuel and oil spill is to stop the source of the spill (literally pick up the object that is spilling), and the next step is to contain it. In other words, stop the spill spreading. The most effective way to contain a fuel and oil spill is to deploy Land Socks around the perimeter of the spill. Place either the 1.5m or the 3m Land Sock around the edge of the spilled liquid. Use multiple land socks if needed, overlapping them by approximately 30cm on each end, until the spill is completely surrounded. This will ensure that the edge of the spill is absorbed into the land sock and as long as the source of the spill has been stopped, no further liquid will breach the land sock perimeter. Now you can switch to clean up measures.
Any liquid spilled will continue to flow in the direction of gravity. Good site construction means that industrial sites are designed in order to flow all excess water towards stormwater drains, to prevent flooding. This is fantastic when you have a rain event, but it also means that any spilled liquids are also going to flow in the direction of stormwater drains. If you have a fuel and oil spill in the vincinity of a stormwater drain it is vital to deploy a land sock in front of the stormwater drain. The easiest way to do this is to lay a Fuel and Oil Land Sock 3m or a 1.5m in front of the stormwater drain if it’s a kerb and channel style, or surrounding it in order to block any flowing liquids from entering it.
Important – In the event of a major spill incident it might also be advisable to consider using a drain seal as well as Land Socks for further drain protection. The drain seal literally seals off an open drain entrance completely, providing a tacky seal so that no liquids can enter the drain. Click for more information on Drain Seals.
Land Socks play an important role in spill containment. Before any clean up measures can commence: a spill must first be contained. Land Socks are used to surround the perimetre of a spill, or to block and protect a near by drain. Ecospill Fuel and Oil Land Socks 1.5m Length are thick and super absorbent.
The first step in cleaning up a fuel and oil spill is to stop the source of the spill (literally pick up the object that is spilling), and the next step is to contain it. In other words, stop the spill spreading. The most effective way to contain a fuel and oil spill is to deploy Land Socks around the perimeter of the spill. Place either the 1.5m or the 3m Land Sock around the edge of the spilled liquid. Use multiple land socks if needed, overlapping them by approximately 30cm on each end, until the spill is completely surrounded. This will ensure that the edge of the spill is absorbed into the land sock and as long as the source of the spill has been stopped, no further liquid will breach the land sock perimeter. Now you can switch to clean up measures.
Any liquid spilled will continue to flow in the direction of gravity. Good site construction means that industrial sites are designed in order to flow all excess water towards stormwater drains, to prevent flooding. This is fantastic when you have a rain event, but it also means that any spilled liquids are also going to flow in the direction of stormwater drains. If you have a fuel and oil spill in the vincinity of a stormwater drain it is vital to deploy a land sock in front of the stormwater drain. The easiest way to do this is to lay a Fuel and Oil Land Sock 1.5m in front of the stormwater drain if it’s a kerb and channel style, or surrounding it in order to block any flowing liquids from entering it.
Important – In the event of a major spill incident it might also be advisable to consider using a drain seal as well as Land Socks for further drain protection. The drain seal literally seals off an open drain entrance completely, providing a tacky seal so that no liquids can enter the drain. Click for more information on Drain Seals.
Controlling sediment from construction sites, dredging, decanting and toxic algae is simplified by using an Ecospill Silt Curtain 2m Skirt (drop length). Made from tough Geofabric, with 100mm float and a 2m high skirt (or drop). Comes fitted with 8mm ballast chain, ready to deploy. Sold in 10m sections.
Ecospill Silt Curtain 2m Skirt Booms are ideal for many varied applications, including:
At Ecospill, we do more than just provide spill kits to our clients. We offer first-hand training and instruction on how to use a spill kit, to ensure that both you, and your staff, are ready to put your spill kit in to action the right way, when the time comes.
But we don’t stop there. We take a great deal of pride in educating our customers on the use of all of our products, including floor bunding, silt socks, and containment booms.
Take a look at our educational videos below, and watch us in action! Learn more about our products and see for yourself why Ecospill can help you with your cleanup needs. In the coming weeks we’ll be adding ‘how to’ videos, including ‘How to Clean up Oil Spills’, videos on each specific spill kit, product snapshots, and more helpful videos to help you improve and perfect your usage of our products, and protect your staff and local environment.
For more information on which spill kit you you should use, see our article on How to Choose the Right Spill Kits.
120L Automotive Spill Kits
Ecospill’s 120L Automotive Spill Kits are designed with mechanical workshops, and automotive industry workplaces in mind. Suitable for cleaning up fuels, oils and non-aggressive chemicals such as coolant etc, these are perfect for industries where ‘anything automotive’ is the go!
What’s Inside the 120L Automotive Spill Kit?
The best of both worlds for hydrocarbon and chemical spills… Our Automotive Spill Kits contain:
How to clean up a fuel, oil or non-aggressive chemical spill?
These are the SEVEN steps to follow to effectively clean up a spill incident:
Spill Kit Servicing
Ecospill offers a comprehensive Spill Kit Maintenance Program to check, inspect and re-stock your Automotive Spill Kits or any other existing spill kits for that matter. If you’d like to be included in this program, please call 1300 736 116 to take the hassle out of your duty of care. It provides peace of mind knowing your spill kits will always be re-stocked to their full response capacity when the unexpected happens.
Of course, you can call Ecospill on 1300 736 116 at any time to have a Kit serviced, following an incident. You can also order re-stocking items and accessories online at www.ecospill.com.au.
